Dimensions of Spiral Wound Gaskets ASME B16.20 used with Raised Face flanges ASME B16.47 series B

Marking of Spiral Wound Gaskets

Cross-section Spiral Wound gasket

Class  150 | 300 | 400 | 600 | 900

Class  150  NPS 26-60
NPS Inner Ring Sealing Element Outer Ring
Inside (d1)
Diameter
Inside (d2)
Diameter
Outside (d3)
Diameter
Outside (d4)
Diameter
26 654.1 673.1 698.5 725.4
28 704.9 723.9 749.3 776.2
30 755.7 774.7 800.1 827
32 806.5 825.5 850.9 881.1
34 857.3 876.3 908.1 935
36 908.1 927.1 958.9 987.6
38 958.9 974.9 1009.7 1044.7
40 1009.7 1022.4 1063.8 1095.5
42 1060.5 1079.5 1114.6 1146.3
44 1111.3 1124 1165.4 1197.1
46 1162.1 1181.1 1224 1255.8
48 1212.9 1231.9 1270 1306.6
50 1263.7 1282.7 1325.6 1357.4
52 1314.5 1333.5 1376.4 1408.2
54 1365.3 1384.3 1422.4 1463.8
56 1422.4 1444.8 1478 1514.6
58 1478 1500.1 1528.8 1579.6
60 1535.2 1557.3 1586 1630.4
NPS Inside (d1)
Diameter
Inside (d2)
Diameter
Outside (d3)
Diameter
Outside (d4)
Diameter
Inner Ring Sealing Element Outer Ring

General notes:

Spiral Wound Gasket
  • Dimensions are in millimeters unless otherwise indicated.
  • Image shows a Spiral Wound gasket with Inner – and Outer ring.
  • d1 = Inside diameter when Inner ring is used.
  • d2 = Inside diameter sealing element when no Inner ring is used.
  • d3 = Outside diameter of sealing element.
  • d4 = Outside diameter of Outer ring.
  • The gasket thickness tolerance is ± 0.13 mm measured across the metallic portion of the gasket, not including the filler, which may protrude slightly beyond the metal.
  • The gasket inside diameter tolerance for NPS 26 through NPS 34 is ± 0.8 mm, and the tolerance for NPS 36 through NPS 60 is ± 1.3 mm.
  • The gasket outside diameter tolerance for NPS 26 through NPS 60 is ± 1.5 mm.
  • The centering ring outside diameter tolerance is ± 0.8 mm.
  • The inside diameter tolerance is ± 3.0 mm.
  • Thickness of inner and outer ring: 2.97 mm – 3.33 mm.
  • There are no Class 900 flanges NPS 50 and larger.